Desk or Tabletop Installation
1.Plug the AC adapter cord into the 9V DC input jack on the base.
2.Wrap the AC adapter cord inside the molded
3.Plug one end of the telephone cord into the TEL LINE jack on the base.
4.Place the telephone cord into the right molded channel cord holder.
5.Plug the other end of the telephone cord into the telephone wall jack. (Remember, the phone must be fully charged before you can use it.)
6.Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch.
Use only the AC adapter that came with the phone.
7.Raise the antenna on the base.
Wall Installation
▼Setting the Handset Retainer for Wall Mounting
1.Remove the handset retainer on the base by sliding it upward.
2.Flip the retainer over so the tab is facing up.
3.Slide the retainer back onto the base.
▼Mounting on a Standard Wall Plate
The phone is designed to be mounted on a standard wall plate.
1.Plug the AC adapter into the base.
2.Place the AC adapter cord inside the left molded channel cord holder.
3.Plug one end of the telephone cord into the TEL LINE jack on the base.
6
