Choosing a Channel
Your radio has 14 preprogrammed channels that you can use to talk to others. You must select the same channel as your party selected.
To choose a channel for the FRS300:
Press the ▲ or ▼ button repeatedly to select one of the 14 channels.
(The number on the LCD changes to indicate that a new channel has been selected.)
The BUSY icon and 
icon appear while receiving a transmission.
Scan Mode
Your radio also allows you to scan for activity from other transmitting radios.
To use the Scan feature:
1. Press the scan button to begin scanning channels. The LCD will indicate that you are in scan mode.
If a signal is present, the radio will stop on the active channel. It will remain on the channel until the transmission ends. After 2 seconds, it will resume scanning.
7
