6.Connect one end of an AC adapter to the camera’s power pigtail and plug the other end into a 120 volt AC (standard indoor) power outlet (if
necessary, connect |
| Tighten the brace against | 1 | Attach the camera |
the extension cord to | 2 | to the mounting | ||
the camera’s pigtail | the camera to |
| screw and turn it | |
| secure it |
| to the desired | |
and connect the AC |
| in place. |
| direction. |
adapter to the |
|
|
|
|
extension cord). | 3 |
|
|
|
Be sure the power |
|
|
| |
Loosen the |
|
| ||
plug and the | wingnut to |
| Adjust the post to | |
connector are tightly | unlock the | 4 | ||
mounting | the correct angle, | |||
twisted together to | post. |
|
| then tighten the |
avoid water leaking |
|
|
| wingnut to lock the |
|
|
| post into place. | |
in.
7.Make sure the Power status light turns on. If it doesn’t, try reconnecting the AC
adapter, and make sure the power outlet isn’t controlled by a wall switch.
Antenna
Power/
Pair button
8
