ENGINE NOISE SUPPRESSION
Interference from the impulse noise gener-
ated by the electrical systems of engines is sometimes a prob/e.m with radios. The
MC6 10 has been designed to be essentially impeNious to ignition impulse noise and d/- ternator noise. However, in some install-
ations it may be necessary to take measures to further reduce the effect of noise inter-
ference. All DC battery wires, antenna
lead, and accessory cables should be rout- ed away from the engine and engine com- partment and from power cabling carrying particularly high currents.
In severe cases of impulse noise interfer- ence, it may be necessary to install a noise
suppression kit that is available from your Marine Dealer.
CARE AND MAINTENANCE
Your MC610 is a precision piece of elec- tronic equipment and you should treat it accordingly. Due to the rugged design,
very little maintenance is required, how- ever, a few precautions should be ob- seNed.
Ifyou radio has been accidentally subjected to spray or splash you should immediately
wipe it down with a soft cloth dampened with fresh water.
If the antenna has been damaged, you should not transmit except in case of emergency. A defective antenna may cause damage to your radio.
You are urged to arrange for periodic per- formance checks with your Marine dealer.