| Specification | |
|
|
|
General |
|
|
Channels | : All International, U.S.A. and Canadian channels, | |
| plus 10 Weather channels | |
Controls | : | |
Status Indicators | : TX (Transmit), HI (High), LO (Low), SCAN, ALERT, | |
| WX, USA, INT, CAN, DSC, (GPS), and Channel | |
| Display | |
Channel Display | : LCD with Orange backlight | |
Buttons | : 16/9, DISTRESS, DSC, SELECT, | |
| HI/LO/SCAN/UIC, WX/ALERT/UIC, CH▲ or ▼ | |
Connectors | : Antenna, ACC, and DC cord | |
Size | : H63 mm x W160 mm x L168 mm (W/O Heat Sink) | |
| H2.52 inches x W6.4 inches x L6.72 inches | |
Weight | : 920 g / 2.03 lbs / 32.4 oz | |
Supply Voltage | : 13.8V DC negative ground | |
Standard Accessories | : Mounting bracket and hardware, microphone | |
| hanger, spare fuse | |
Antenna Impedance | : 50 Ω nominal | |
Microphone | : Rugged 2 kΩ condenser mic element with | |
| coiled cord | |
Speaker | : 1.82 inch, Mylar Cone 8 Ω | |
Operating Temperature Range | : | |
Shock and Vibration | : Meets or exceeds EIA standards, RS152B and | |
| RS204C | |
FCC Approvals | : Type accepted under part 80 of the Rules; meets | |
| Great Lakes Agreement and party boat | |
| requirements | |
Transmitter |
|
|
Power Output | : 1 watt or 25 watt (switch selectable) | |
Power Requirement | : Not rated on LO, 25 watts output: 5.3A@13.8V DC | |
Modulation | : FM ±5 kHz deviation (FCC designator F3E) | |
Hum and Noise | : 45 dB@1 kHz with 3 kHz deviation with 1000 Hz | |
| modulating frequency (nominal) | |
Audio Distortion | : Less than 8% with 3 kHz deviation with 1000 Hz | |
| modulating frequency | |
Spurious Suppression | : | |
Output Power Stabilization | : | |
Frequency Range | : 156 to 157 MHz | |
Frequency Stability | : ±10 ppm @ | |
Receiver |
|
|
Frequency Range | : 156 to 163 MHz | |
Sensitivity | : 0.25 µV for 12 dB SINAD | |
Circuit | : Dual Conversion Super Heterodyne PLL | |
Squelch Sensitivity | : 0.2 µV Threshold | |
Spurious Response | : 85 dB | |
Adjacent Channel Selectivity | : 67 dB @ ±25 kHz | |
Audio Output Power | : 2.8 watts (10% Distortion) | |
Power Requirement | : 270 mA @ 13.8V DC squelched, 0.6A @ 13.8V DC | |
| at maximum audio output | |
IF Frequencies | : 1st 21.4 MHz, 2nd 455 kHz | |
25
