– 3 –
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on
the accessibility features of this product, please call 1-800-874-9314
(voice or TTY).
Basic SetupInstall the Battery Pack
1Press down on the handset battery
case cover (use the finger indention
for a better grip) and slide the cover
downward to remove.
2Plug the battery pack connector
(red & black wires) into the jack
inside the battery compartment.
(The connector notches fit into the
grooves of the jack only one-way.)
Match the wire colors to the polarity
label in the battery compartment, and
push the connector in until you hear a
click.
3Make sure you have a good connection
by slightly pulling on the battery
wires. If the connection is secure, the
battery jack will remain in place.
4Place the battery case cover back on
the handset by sliding it upwards
until it clicks into place.
5Place the handset in the charging
cradle with the keypad facing forward.
•Use only the Uniden battery
(BT-446) supplied with your phone.
•Recharge your handset on a regular basis by
returning the handset to the charger after each
phone call.
Rechargeable Nickel-Metal-Hydride Batteries Must Be
Recycled or Disposed of Properly
UU424BH(TCX805) OM.fm Page 3 Tuesday, June 21, 2005 9:37 AM