[79] TROUBLESHOOTING
www.uniden.com
Severe noise interference.
•Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
•Move to another location or turn off the source of interference.
The Caller ID does not display.
•The hands et was picked up before the sec ond ring.
•The call was placed through a switchboard.
•Call your local telephone company to verify your Caller ID service is current. There may be a
problem with your Caller ID service.
You cannot register the handset
at the base.
•Charge the battery pack for 15-20 hours.
•De-register the handset (see "De-register the Handset" on page32) and register the handset
(see "Register the Handset" on page68).
The handset doesn't
communicate with other
handsets.
•De-register the handset (see "De-register the Handset" on page32) and register the handset
(see "Register the Handset" on page68).
•Make sure that you have registered all handsets.
An extra handset can't join
the conversation. •Make sure there are not 2 handsets already using the 3-way conference feature.
The handset or the base can't
join the conversation •Make sure that another handset or base is in privacy mode.
The answering system does
not work.
•Make sure the base unit is plugged in.
•Make sure that the answering system is turned on.
•Make sure that the message record time is not set to Announce only (see page26).
Messages are incomplete. •The incom ing messages may be too long. Remind callers to leav e a brief message.
•The memory may be full. Delete so me or all of the saved message s.
After a power failure, the
outgoing message is deleted. •Record your greeting again. The default message should remain.
Symptom Suggestion
TROUBLESHOOTING