Uniden UBC92XLT manual Direct Entry Search

Models: UBC92XLT

1 52
Download 52 pages 16.95 Kb
Page 34
Image 34

UB324 Paper OM reduced size.fm Page 34 Wednesday, February 9, 2005 9:32 PM

set the scanner to program band select mode, press Func and PSrc. SRCH appears. Then select a search bank.

When you select the search bank, the lower limit and upper limit frequency assigned in the search bank alternate on the display.

To select another search bank, press Func + PSrc or Func + to increase the search bank number or Func + to decrease it. Hold down Func + or Func + for about 1 second to quickly move through the search bank numbers.

After choosing the search bank, follow these steps to set the lower limit and upper limit frequency.

1.Enter the lower limit frequency by using the 0-9 and /Clr keys.

2.Press E to select the lower limit frequency.

3.Enter the upper limit frequency by using the 0-9 and /Clr keys.

4.Press E to select the upper limit frequency.

Direct Entry Search

You can use direct entry search to search up or down from the currently displayed frequency.

1.If the scanner is scanning or searching, press Hold.

2.Enter the frequency you want to start from by using the number keys. (Press /Clr to enter a decimal point).

3.Press Func + or Func + . The scanner searches, starting from the frequency you entered in Step 2.

Special Features

34

Page 34
Image 34
Uniden UBC92XLT manual Direct Entry Search