Water Warning, Belt Clip, LOW Battery Alert

WATER WARNING

Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture.

Slide the belt clip until it snaps into place.

To remove the belt clip. Pinch and hold belt clip and latch (see arrows indicated) and slide the belt clip in the direction shown.

Pinch Belt Clip and Latch

If the Battery level becomes low, the battery indicator icon will appear on

the LCD and begin flashing.

The unit will go into a Battery Low Mode. The Transmit Mode is disabled. Replace the batteries immediately to continue using the radio.

Image 4

Contents

UH037SX-2 and UH037SX-4 UHF Radio Transceiver Your Belt Clips Battery Warning Battery InstallationMake sure your radio is off Remove the battery cover Replace the battery cover LOW Battery Alert Water WarningBelt Clip To attach the belt clip Power ON/OFF VolumeAdjusting the KEY Beeps Press and hold to turn the Radio OFF Press channel Desired channelBefore you transmit, listen for Activity on the selected channel Range Maximum Range Reduced Range Automatic Squelch Feature MonitorTo use monitor Or for 2 seconds or press key once Operation with the aid of a Repeater DROP-OUT Delay Otherwise, the radio resumes scanning UHF Channels & Frequencies Warranty