![](/images/new-backgrounds/1301179/30117919x1.webp)
REPLY DELAY
While scanning, the UH039P stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning.
VOX |
|
|
|
|
|
|
VOX is the automatic transmitting function by inputting voice | ||||||
into the optional VOX headset mic without pressing the | PTT | |||||
button. | two times momentarily in Stand By mode to enter | |||||
Press | ||||||
VOX Sensitivity mode. |
|
|
|
|
| |
The current selected VOX setting will flash on the CTCSS |
| |||||
channel indicator display. | to adjust the VOX sensitivity. 1 | |||||
Press channel/scan | or | |||||
is the highest sensitivity and 4 is the lowest sensitivity. VOX | ||||||
can be turned off by selecting | 'oF'. The 'VOX' icon is shown on | |||||
the display when VOX is selected to on. |
|
| ||||
The 'TX' icon blinks when the | voice level is of a level where it | |||||
is possible to transmit at the current selected VOX sensitivity | ||||||
level. | two times momentarily to confirm the selected | |||||
Press | ||||||
setting and exit to standby. |
|
|
|
| ||
KEYLOCK ON/OFF |
|
|
|
|
| |
Press | three times momentarily in Stand By mode to enter | |||||
Keylock mode. |
|
|
|
|
| |
The | flashes during the Setting mode. Press channel/scan | |||||
or | to select 'on' or 'oF'. | is shown on the display | ||||
when Keylock on is selected to on. |
|
|
| |||
Press | to confirm the selected setting. | to turn the unit | ||||
To exit Keylock on mode, press and hold | ||||||
off and then turn on again. |
|
|
|
|
While in Keylock on mode, the UH039P will still receive transmissions.
9