UNIDEN Model uh089sx UHF CB Radio
Operation
Group Scan (GS) Mode
Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p. 11)
To use GS Mode Scanning, press | . GS icon appears on the display. |
|
GS Scanning checks the Instant Priority Channel for activity regularly. |
| |
If the Priority Channel becomes |
|
|
active the radio will stay on that |
|
|
channel for as long as the signal is |
|
|
present. If the received signal |
|
|
ceases, Priority Scanning continues |
|
|
after 3 seconds. |
|
|
If scanning stops on a channel |
|
|
which is not a Priority Channel, | MENU | MON |
|
| |
uh089sx will continue monitoring | ENTER | DCS/CTCSS |
|
| |
the Priority Channel for activity |
|
|
while listening to the active one. |
|
|
To deactivate SCAN, press the | button or the PTT button on the |
|
microphone. |
|
|
If SCAN is deactivated while it is tuned to an active channel, the uh089sx will stay on that active channel.
If none of the channels are active, the uh089sx will reinstate the scan start channel.
If OS/GS Scanning is initiated when there are no channels programmed in OS/GS memory, an error tone will be heard and scanning will not start (see Programming Scan Channels - below).
Programming Scan Channels
Select which Scanning Mode you wish to use - OS or GS.
Select the channel you want to store.
Press 
to store. MEM icon appears and a short tone beep is heard.
To remove the channel from
Memory, press 
once more. The MEM icon disappears.
MENU | MON |
ENTER | DCS/CTCSS |
9
