Uniden XC310 manual Charging the Battery Pack

1.Remove the battery compartment cover on the Handset by sliding it down.

2.Connect the Nickel-Cadmium Battery Pack by plugging it into the socket at the top of the battery compartment. Note: The connector fits only one way and requires only a minimal amount of pressure to insert.

Always install the Battery Cable with the BLACK wire to the left.

3.Place the Battery Pack inside the compartment and slide the battery cover back on. Make sure not to get the wires from the Battery Pack caught in the cover.

...

=

t

"-"

Charging the Battery Pack

The rechargeable Nickel-Cadmium Battery
Pack included with your XC 310 must be
charged for approximately 12-16 hours before	----------
using the phone for the first time. Place the
Handset on the Base Unit and make sure the

CHARGELED lights. If the CHARGELED does not light, check to see that the AC adapter is plugged in.

Cleaning the Battery Contacts

To maintain a good charge, it is important to clean all 4 charge contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents.

	CONTACTS
...1'.:..	ONTACTS
a5(105	.
~(§)cIJ
d5c!5<6	..\AlE
@@)@)
es~itB

CONTACTS 14