∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
∙Make sure the wall material is capable of supporting the weight of the base and handset.
∙ Use #10 screws with anchoring devices suitable for the wall material where the base will be placed.
1. Insert two mounting screws
315 16 inches apart. Allow about 3 16 of an inch between the wall and screw heads for mounting the phone.
2.Plug the AC adapter into the base. 
3. Place the AC adapter cord inside the molded channel.
4. Plug one end of the long telephone cord into the TEL LINE jack on the base.
5. Place the cord inside the molded channel on the bottom of the base.
6. Place the base on the screws and push down until it’s firmly seated.
7.Plug the other end of the telephone line cord into the wall jack.
8.Plug the AC adapter into a standard 120 VAC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
Setting the Handset Retainer
The handset retainer holds the handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up.
1. Push up on the handset retainer on the base, and slide the tab out.
2. Flip the retainer over so the tab faces up.
3. Put the retainer back into its slot on the base.
4.Push down on
the handset retainer
until it snaps into place.
6
