Parents’ Unit
Buzzer: An alarm for abnormal temperatures
Warning Light: Alarm
LCD Screen
Set Button:
A. Push 2 seconds to switch between °C & °F.
B. Choose high temperature (fever warning temperature point
Warning Cancel Button:
Temporarily cancels buzzer sound
Power Button:
A. Push 2 seconds to turn power on or off
B. Push to set the fever alarm temperature
Child’s Thermometer
INSTRUCTIONS FOR USE
1. Turn on the baby’s thermometer by pressing |
the power button for approximately 2 sec- |
onds. The LCD display will show the |
temperature data. |
2. Clip the thermometer to the |
baby’s diaper, pajamas, or |
our special belt, approxi- |
mately one inch |
timeters) to the left of the |
belly button. If you are using |
the belt provided, it’s best to |
fasten it over the diaper or |
pajamas to avoid any |
possible irritation. Make |
sure the temperature sensor |
on the back of the unit is in |
contact with the skin and that |
your baby is wearing clothing |
covering the stomach to avoid the loss of |
body heat. |
3. Turn on the Parents’ Unit by pressing the |
power button for approximately 2 seconds. |
The LCD display will show it is searching for |
LCD Screen
Power Button:
Push 2 seconds to turn power on or off
Set Button:
Push 2 seconds to switch between °C & °F
the signal from the thermometer. After |
several seconds the LCD display will show |
the temperature reading received from the |
thermometer. |
4. To switch between Celsius and Fahrenheit, press |
the (S) button for approximately 2 seconds. Both |
units have to be independently set. |
6
7
