Unitech PT600 3.3 Configure the Terminal in SET command

- 22 -

TYP This command dumps the content of a

file on the PDT's LCD. The content of

the file will be displayed 128 (16

character x 8 line) characters at a time.

Press any key to show the next page or

hit [CMD] then [ALPHA] keys to return to User mode

prompt. If you try to display a program or binary file, you may

only see unintelligible characters.

CPY This command allows users to make copy of data from a source

device to a destination device. The source device may be a file,

COM(serial input), CON(keyboard), and the destination device

may be a file, COM(serial output), CON(LCD display).

Source Dest. Function

file1 file2 copy file1 to file2

file1 COM output content of file1 to serial port

file1 CON output content of file1 to LCD

COM file2 input data from serial port and store in file2

CON file2 input data from keyboard and store in file2,

press [CMD] and then [ALPHA] key to end

the data input

SET This command allows users to set system date and time, assign

laser or pen scanning feature and enable to display power-on

logo (see next section).

3.3 Configure the Terminal in SET command

There are three categories of general system

configuration available in SET command. Select

the corresponded number, 1-3, to set system

date/time, assign scanning feature and enable

power-on Logo display. Hit [CMD] then [ALPHA] keys to return to User

mode prompt.

< TYPE FILE >

SCAN.DAT

1.DATE & TIME

2.SCANNER

3.DISPLAY