Mobile Home Installation:

For minimum protection, smoke alarms should be installed in compliance with H.U.D. Manufactured Home Construction Safety Standards, Title 24 CFR, Section 3280.208 and Section 3282. For additional protection, see Single Story Residence smoke alarm requirements/recommendations for Existing Homes and New Construction Homes.

Note: For mobile homes built before 1978, install smoke alarms on inside walls between 4” and 12” from the ceiling (older mobile homes have little or no insulation in the ceiling). This is especially important if the ceiling is unusually hot or cold.

Install a smoke alarm inside each bedroom and in the hallway outside each separate sleeping area.

AVOID THESE LOCATIONS

•the garage – products of combustion are present when you start your automobile.

•in areas with high humidity, like bathrooms or areas near dishwashers or washing machines. Install at least 3 feet (0.9 meters) away from these areas.

•in areas of turbulent air such as air returns or heating and cooling supply vents. Install at least 3 feet (0.9 meters) away from these areas.

•in extremely dusty, dirty or insect-infested areas. Loose particles interfere with smoke alarm operation.

•in areas where temperature may fall below 400F (4.40C) or rise above 1000F (37.80C).

•closer than 5 feet (1.5m) from fluorescent lights, electrical "noise" and flickering may affect the alarm's operation.

•do not locate this alarm within 5 feet (1.5m) of any cooking appliance.

•in areas of reverse venting of fuel burning appliances caused by outdoor ambient conditions, such as:

-wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/ humid air with extended periods between cycles).

-negative pressure differential resulting from the use of exhaust fans.

-simultaneous operation of several fuel burning appliances competing for limited internal air.

-vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.

-obstructions in or unconventional vent pipe designs which can amplify the above situations.

-extended operation of unvented fuel burning devices (range, oven, fireplace, etc.).

-temperature inversions which can trap exhaust gasses near the ground.

-car idling in an open or closed attached garage or near a home.

Page 5

Page 4 Page 6
Page 5
Image 5
Universal CD-9795 manual Avoid These Locations
Page 4 Page 6

CD-9795 specifications

The Universal CD-9795 is a versatile and high-quality compact disc player that has garnered attention for its impressive range of features and technologies. Designed with both audiophiles and casual listeners in mind, the CD-9795 sets a standard in audio performance, functionality, and build quality.

At the heart of the CD-9795 is its state-of-the-art digital-to-analog converter (DAC), which ensures that audio playback is crisp and clear. This high-resolution DAC is coupled with advanced error correction technology, allowing the player to read discs with precision, even in less-than-ideal conditions. As a result, users can enjoy their music with minimal distortion and noise.

The CD-9795 supports a wide variety of audio formats, including standard CDs, CD-R/RW, and MP3 discs. This versatility makes it an ideal choice for those with extensive music collections stored across various media. Additionally, the player is equipped with a seamless playback feature, allowing for smooth transitions between tracks without interruption.

One of the standout characteristics of the Universal CD-9795 is its robust build quality. Constructed with a solid chassis and premium materials, it is designed to minimize vibrations and ensure optimal performance. The player features a sleek and user-friendly interface, complete with an intuitive remote control that makes navigating playlists and settings effortless.

Connectivity is another area where the CD-9795 excels. It offers multiple output options, including RCA, optical, and coaxial connections, making it compatible with a wide range of audio systems. This flexibility allows users to integrate the player easily into their existing setups, enhancing their overall listening experience.

In terms of technology, the Universal CD-9795 incorporates advanced features such as programmed playback and random play modes, enabling users to customize their listening experience. The display is easy to read and provides essential information about the track being played, including the time elapsed and remaining.

Overall, the Universal CD-9795 is an exceptional compact disc player that embodies quality, versatility, and advanced technology. Its combination of high-fidelity audio reproduction, robust construction, and user-friendly features make it a standout choice for anyone seeking to elevate their music listening experience. Whether at home or on the go, the CD-9795 promises to deliver impressive performance every time.
Top Page Image Contents