RECOMMENDED LOCATION OF ALARMS

•Locate the first smoke alarm in the immediate area of the bedrooms. Try to protect the exit path as the bedrooms are usually farthest from an exit. If more than one sleeping area exists, locate additional smoke alarms in each sleeping area. If a hall is more than 40 feet (12 meters) long, install a smoke alarm at each end.

•Locate additional smoke alarms to protect any stairway as stairways act like chimneys for smoke and heat.

•Locate at least one smoke alarm on every floor level.

•Locate a smoke alarm in any area where a smoker sleeps or where electrical appliances are operated in sleeping areas.

•Smoke, heat and other combustion products rise to the ceiling and spread horizontally. Mounting the smoke alarm on the ceiling in the center of the room places it closest to all points in the room. Ceiling mounting is preferred in ordinary residential construction. However, in mobile homes, wall mounting on an inside partition is preferred to avoid the thermal barrier that may form at the ceiling.

•When mounting smoke alarm on the ceiling, locate it a minimum of 4" (10cm) from a side wall or corner (see Diagram A).

•When mounting smoke alarm on a wall, if local codes allow, use an inside wall with the top edge of the smoke alarm a minimum of 4" (10cm) and a maximum of 12" (30.5cm) below the ceiling/ wall intersections (See Diagram A).

Mobile Home Installation:

For minimum protection, smoke alarms should be installed in compliance with H.U.D. Manufactured Home Construction Safety Standards, Title 24 CFR, Section 3280.208 and Section 3282. For additional protection, see Single Story Residence smoke alarm requirements/recommendations for Existing Homes and New Construction Homes.

Note: For mobile homes built before 1978, install smoke alarms on inside walls between 4” and 12” from the ceiling (older mobile homes have little or no insulation in the ceiling). This is especially important if the ceiling is unusually hot or cold.

Install a smoke alarm inside each bedroom and in the hallway outside each separate sleeping area.

Page 2

Page 1 Page 3
Page 2
Image 2
Universal SS-901 manual Recommended Location of Alarms
Page 1 Page 3

SS-901 specifications

The Universal SS-901 is a state-of-the-art piece of equipment designed for professional use in various applications such as audio production, broadcasting, and live sound. Engineered for versatility and reliability, the SS-901 integrates advanced technologies and robust features that make it a standout choice for both audio engineers and technicians alike.

One of the standout features of the Universal SS-901 is its high-fidelity audio processing capabilities. The device supports a wide frequency range, ensuring that every detail in the audio spectrum is captured with precision. Its low-noise circuitry minimizes distortion, which is crucial for achieving clarity in sound reproduction. The SS-901 also includes advanced dynamic range processing, allowing users to control the audio levels effectively and avoid clipping, making it ideal for live performance scenarios where sound fluctuations can be unpredictable.

The SS-901 is equipped with multiple input and output options, making it highly adaptable to different setups. It offers various connectivity formats, including XLR and TRS inputs, ensuring compatibility with a wide range of microphones and instruments. Additionally, with its digital output capabilities, the SS-901 can seamlessly integrate with digital audio workstations, facilitating an efficient workflow for audio production.

Built to last, the Universal SS-901 features a rugged chassis that can withstand the rigors of both studio and stage environments. Its intuitive interface includes a bright, easy-to-read display and user-friendly controls, allowing for quick adjustments and monitoring during critical moments. The device also boasts comprehensive metering options, enabling users to keep a close eye on audio levels in real-time.

In terms of modern technologies, the SS-901 is designed with an eye towards energy efficiency, utilizing advanced power management systems to reduce unnecessary energy consumption while maintaining peak performance. Furthermore, firmware updates can be performed easily to enhance functionality and introduce new features over time.

In conclusion, the Universal SS-901 is a powerful and versatile tool for audio professionals, characterized by its superior audio quality, robust construction, and user-centric design. Whether in the studio, on stage, or in broadcast environments, the SS-901 is engineered to deliver exceptional performance and reliability, making it an invaluable asset for anyone in the audio industry.
Top Page Image Contents