Universal Remote Control URC - 4140 Installing the Batteries, Features and Functions

Installing the Batteries

Your TOTAL CONTROL needs two new AA/LR6 alkaline batteries.

1Remove the battery cover from the back of your

TOTAL CONTROL.

2Match the batteries to the (+) and (-) marks inside the battery case, then insert the batteries.

3Press the battery cover back into place.

Features and Functions

Picture of the TOTAL CONTROL on page 3.

1	LED
	The LED (Light Emitting Diode) flashes red to show the
	remote is working.
2	Device keys
	The TV, VCR/DVD, SAT and AUX keys select the device
	to be controlled. For example pressing the TV key allows
	the remote to control the functions of you Television,
	after pressing the VCR/DVD key you can operate your
	Video Recorder or DVD Player, the SAT key operates your
	Satellite Receiver or Cable Converter etc.
3	Power key
	The Power key controls the same function as on your
	original remote.
4	SET key
	The SET key is used to set up your TOTAL CONTROL and
	to access special functions.
5	Number keys
	The number keys (0-9, 10, 20 (AV)) provide functions just
	like your original remote. If your original remote uses
	one/two digit input switching (-/-- symbol), this function
	can be obtained by pressing the -/-- key. If your original
	remote has a 20 key, this function can be found under the
	AV key.
6	AV key
	The AV key operates the same function as it did on your
	original remote control.
7	Menu Key
	The Menu key controls the same function as it did on your
	original remote.
8	Directional Keys
	If available on your original remote, these keys will allow

you to navigate through the menu of your device.

9

10

The EXIT key

With the EXIT key you will EXIT the menu.

The OK key
The OK key confirms your choice made in the menu.	4