DEVELOP AND PRACTICE A PLAN OF ESCAPE

BASICS OF ESCAPE PLAN

oMake a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder.

oHave a family meeting and discuss your escape plan, showing everyone what to do in case of fire. o Determine a place outside your home where all of you can meet if a fire occurs.

o Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear the sound.

o Identify children's bedrooms with red stickers placed in the upper left corner of the windows. They are available from your local fire department.

o Practice a fire drill at least every six months. Practice allows you to test your plan before an emergency. You may not be able to reach your children. It is important they know what to do!

WHAT TO DO WHEN THE ALARM SOUNDS

oLeave immediately by your plan of escape. Every second counts, so don't waste time getting dressed or picking up valuables.

oIn leaving, don't open any inside door without first feeling its surface. If hot, or if you see smoke seeping through cracks, don't open that door! Instead, use your alternate exit. If

inside door is cool, place your shoulder against it, open it slightly and be ready to slam it shut if heat and smoke rush in.

oStay close to the floor if air is smoky. Breathe shallowly through a cloth, wet if possible. o Once outside, go to your selected meeting place and make sure everyone is there.

o Call the fire department from your neighbor's home – not from yours!

o Don't return to your home until fire officials say that it is all right to do so.

NATIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION

For your information, the National Fire Protection Association's Standard 72, reads as follows: “11.5.1 One- and Two-Family Dwelling Units. 11.5.1.1 Smoke Detection. Where required

by applicable laws, codes, or standards for the specified occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms. Exception: Smoke alarms shall not be required in sleeping rooms in existing one- and two-family dwelling units. (2) Outside of each separate sleeping area, in immediate vicinity of the sleeping rooms. (3) On each level of the dwelling unit, including basements. Exception: In existing one- and two-family dwelling units, approved smoke alarms powered by batteries are permitted.

“A.11.8.3 Are More Smoke Detectors Desirable? The required number of smoke detectors might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke detectors. For this reason, it is recommended that the householder consider the use of additional smoke detectors for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke detectors. The installation of smoke detectors in kitchens, attics (finished or unfinished), or garages is not normally recommended, as these locations occasionally experience conditions that can result in improper operation.”

The equipment should be installed using wiring methods in accordance with the National Fire ProtectionAssociation’s Standard 72, Chapter 11. (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269).

THIS PRODUCT IS LISTED TO UL STANDARD FOR SAFETY,

UL217 6TH, BY UNDERWRITERS LABORATORIES

Page 6

Page 5 Page 7
Page 6
Image 6
Universal Security Instruments SS-795 manual Develop and Practice a Plan of Escape, Basics of Escape Plan
Page 5 Page 7

SS-795 specifications

Universal Security Instruments SS-795 is a state-of-the-art smoke and carbon monoxide detector designed to enhance safety in residential and commercial settings. Built with advanced technology and user-friendly features, this device offers comprehensive protection from potential fire and carbon monoxide hazards.

One of the standout features of the SS-795 is its dual-sensor technology, which combines photoelectric and ionic sensors. This dual approach allows the device to detect smoke from various types of fires, including both smoldering and fast-flaming fires, ensuring a quicker reaction to potential dangers. The photoelectric sensor is particularly efficient in detecting slow-burning fires, which often produce more smoke and are more likely to occur in residential environments.

Another key characteristic of the SS-795 is its built-in voice alarm system. This feature includes a clear voice announcement that not only alerts users to the presence of smoke or carbon monoxide but also specifies the nature of the hazard. This is particularly beneficial for households with children or elderly members, as it ensures that everyone is promptly informed of the danger.

The SS-795 is also equipped with a unique hush feature, allowing users to temporarily silence the alarm during false alarms, such as those caused by cooking smoke. This prevents unnecessary panic and ensures that the alarm only sounds when genuinely needed. In addition, the detector comes with a low battery chirp indicator, notifying users when it’s time to replace the battery for optimal performance.

Installation is straightforward, thanks to the user-friendly design of the SS-795. The device is battery-powered, ensuring that it remains operational even during power outages. Its sleek design allows for easy integration into any home decor, whether mounted on a ceiling or placed on a wall.

In conclusion, Universal Security Instruments SS-795 is a reliable and multifunctional smoke and carbon monoxide detector that prioritizes safety. With its advanced dual-sensor technology, voice alarm system, hush feature, and easy installation, it effectively addresses the needs of modern users. Investing in the SS-795 is a proactive step towards protecting your home and loved ones from potential fire-related hazards.
Top Page Image Contents