Univex 7236L.002, 7236LC Lifetime, Whirlpools By American Standard, High Gloss Acrylic, HD-4

LIFETIME™ 6' X 36"

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

72"

(1829mm)

		11"
	13-3/4"		(279mm)
7-3/4"	(349mm)
(197mm)	3"
	(76mm)
	6"
	(152mm)
				36"
CUT OUT IN FLOOR				(914mm)
FOR DRAIN

36"

(914mm)

21-1/2"(H)

(546mm)

20"(C)

(508mm)

C/L OF

OVERFLOW

20-1/8"(A)

(511mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 7236L WHIRLPOOL

INSTALLED SIZE	72 x 36 x 21-1/2 In. (1829 x 914 x 546mm)
WEIGHT		106 Lbs. (48 Kg.)
WEIGHT w/WATER		1031 Lbs. (467 Kg.)
GAL. TO OVERFLOW		111 Gal. (420 L)
WHIRLPOOL MIN. OPERATING VOL.		53 Gal. (201 L)
BATHING WELL AT SUMP		53-1/2 x 26-1/4 In. (1359 x 667mm)
BATHING WELL AT RIM		64-1/2 x 30 In. (1638 x 762mm)
WATER DEPTH TO OVERFLOW		18-1/2 In.(470mm)
FLOOR LOADING		57 Lbs./Sq.Ft. (280 Kgs./Sq.m)
(PROJECTED AREA)

	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP	2.1 HP,14.4 AMPS,120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH FILLER FOR ADDITIONAL INFORMATION.

OPTIONAL 3-WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6FT-APRON MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	HD-4
© 2007 American Standard Inc.		Revised 7/07