SERVICE AND ADJUSTMENTS

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

•Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

•Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 28)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 28

TO START ENGINE WITH A WEAK BATTERY (See Fig. 29)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEAK OR DEAD

 

 

 

 

 

 

 

FULLY CHARGED

BATTERY

 

 

 

 

 

 

 

BATTERY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIG. 29

24

Page 23 Page 25
Page 24
Image 24
Univex 96043004400, 2348LS owner manual To Check Brake, Front Wheel TOE-IN/CAMBER, To Remove Wheel for Repairs See Fig
Page 23 Page 25

2348LS, 96043004400 specifications

The Univex 96043004400,2348LS is an advanced piece of equipment designed to meet the demands of modern food processing and preparation. This versatile machine is recognized in the industry for its reliability and efficiency, making it an essential tool for restaurants, catering businesses, and food manufacturing facilities.

One of the standout features of the Univex 96043004400,2348LS is its powerful motor. With robust horsepower, it provides exceptional mixing capabilities, allowing for the preparation of large batches of ingredients with ease. This power is complemented by a range of speed settings, delivering customizable performance to suit various mixing requirements, whether it’s dough, batters, or other food preparations.

The design of the Univex 96043004400,2348LS highlights both functionality and user-friendliness. The machine is equipped with a large capacity bowl, enabling users to handle significant quantities of ingredients efficiently. The stainless steel construction of the bowl and other components not only ensures durability but also makes cleaning and maintenance straightforward, which is crucial for maintaining hygiene standards in food preparation environments.

One of the key technologies integrated into the Univex 96043004400,2348LS is its planetary mixing system. This technology ensures that every ingredient is evenly mixed, eliminating the risk of unmixed portions, resulting in consistent quality across batches. The machine also offers various attachments, such as whisk and dough hooks, enhancing its versatility for different types of tasks.

Safety features are an important consideration in the design of the Univex 96043004400,2348LS. The machine comes equipped with a safety guard that prevents access to the mixing area while the machine is in operation, minimizing the risk of accidents. Additionally, the machine's sturdy base and design ensure stability during use, further enhancing safety.

In conclusion, the Univex 96043004400,2348LS is a robust and versatile mixing machine that stands out for its powerful motor, durable design, and advanced mixing technology. Its wide range of speed settings and attachments makes it suitable for various culinary tasks, while its safety features ensure a secure working environment. This machine is an investment in efficiency and quality for any food processing operation.
Top Page Image Contents