Manuals / Univex / Kitchen Appliance / Refrigerator

Univex Refrigerator - Freezer manual Preparation, Adding Door Panels on models with trim kit

Models: Refrigerator - Freezer

1 18
Download 18 pages 33.3 Kb
Page 11
Image 11

Adding Door Panels (on models with trim kit)

These instructions describe how to insert decorator panels and what size the panels should be.

Panels should be cut to the following dimensions:

Top freezer panel—36.4 cm x 47.6 cm

Bottom freezer panel—36.4 cm x 82.2 cm

Fresh food panel—51.0 cm x 165.6 cm

Panels that are 6 mm thick will fit the door frame trim with no special preparation. If you have a material thinner than 6 mm, you will need to add a filler behind the panel for proper fit.

Pre-cut white and black panels are available from your dealer.

Special cut- out required, see below.

47.6 cm

82.2 cm

36.4 cm

Special cut-

51.0 cm out required, see below.

165.6 cm

36.4 cm

3 mm

8 mm

A cut-out is required at these outer corners, 8 mm long, 3 mm deep.

Preparation

Inserting the Door Panels

1. REMOVE THE DOOR HANDLE TRIM

a. Open the freezer door and remove the single screw from the top handle cap. Do not try to remove the cap.

b. Loosen the screws across the top trim of the door approximately 6 mm. This allows the top handle cap to slip out from under the top trim.

c. Remove the 5 screws from the

full–length handle. Keep all screws. Extra replacement screws for the door trim can be found in the storage drawers.

d. Carefully remove the freezer door handle along with the top handle cap.

NOTE: Be careful not to damage the bottom handle cap when removing the freezer door handle. It is attached to the full-length handle with a screw and does not need to be removed from the handle.

2. INSERT THE PANELS

Carefully push the door panels into the slots. Make sure that the top freezer panel is put in with the cut-out at the upper left hand corner. When inserting the fresh food panel make sure the cut- out is at the upper right hand corner.

3. REPLACE THE DOOR HANDLE TRIM

Reinstall the full–length handle and top handle cap. Loosely screw the handle onto the door. Place the cap on the top of the handle and loosely screw down the cap. Lift the handle up and tighten the top screw on the handle. Then tighten the handle cap screw so that the cap and handle fit flush. Tighten all the screws.

The fresh food panel is installed the same way.

(continued next page)

11

Page 10 Page 12
Page 11
Image 11
Univex Refrigerator - Freezer manual Preparation, Adding Door Panels on models with trim kit, Inserting the Door Panels
Page 10 Page 12

Refrigerator - Freezer specifications

The Univex Refrigerator-Freezer is a cutting-edge appliance designed to meet the demanding needs of both residential and commercial kitchens. Renowned for its reliability and efficiency, it serves as an essential tool for chefs and home cooks alike. This versatile unit combines the functionalities of refrigeration and freezing into one compact solution, optimizing space without sacrificing performance.

One of the standout features of the Univex Refrigerator-Freezer is its advanced temperature control system. This system ensures that both the refrigerated and frozen compartments maintain precise temperatures, preventing temperature fluctuations that could adversely affect food quality. With adjustable temperature settings, users can easily customize the environment to meet specific storage requirements.

Energy efficiency is a priority in the design of the Univex Refrigerator-Freezer. Equipped with an eco-friendly cooling system, the appliance minimizes energy consumption, which not only helps to reduce utility bills but also aligns with sustainable living principles. The use of high-quality insulation further enhances its energy-saving capabilities, keeping the cold air contained and reducing the need for the compressor to operate frequently.

The unit's interior layout is thoughtfully designed for optimal organization. Adjustable shelving allows users to modify the space according to their needs, making it easy to store a variety of food items. Additionally, the design includes specialized compartments for specific types of food, maximizing storage efficiency while ensuring everything is easily accessible.

Durability is another hallmark of the Univex Refrigerator-Freezer. Constructed from robust materials, it is built to withstand the rigors of daily use in busy kitchens. The stainless steel exterior not only provides a sleek, modern look but also resists corrosion and is easy to clean, ensuring the appliance retains its aesthetic appeal even after years of service.

In terms of technology, the Univex Refrigerator-Freezer boasts a user-friendly digital control panel. This intuitive interface allows for easy temperature adjustments and provides real-time feedback on the appliance's performance. Additionally, some models come with smart technology integration, allowing users to monitor and control the appliance remotely via smartphone apps.

The overall design of the Univex Refrigerator-Freezer reflects a commitment to user satisfaction, combining functionality, efficiency, and durability. Whether used in a bustling commercial kitchen or a home setting, it stands out as a versatile and reliable solution for all refrigeration and freezing needs.