Before You Begin
Note: For more information, you can also refer to the Support section of the USRobotics Web site:
www.usr.com/support
Note: Your model number is 7905A. It is important that you have your serial number written down before you install the 5-Port 10/100Mbps Ethernet Switch. You can find your serial number on the bottom label of the switch and on the side of the package. If you ever need to call our Technical Support department, you will need this number to receive assistance.
Step 1. Connect the power adapter to the switch, then plug the power adapter into a standard power outlet.
Step 2. Connect your 5-Port 10/100Mbps Ethernet Switch to your Ethernet- ready device.
Congratulations! The installation of your USRobotics 5-Port 10/100Mbps Ethernet Switch is complete. As connections are established with the 5-Port 10/100Mbps Ethernet Switch, the corresponding LED lights will turn on. Repeat this step as needed for up to four additional devices.