INSTALLATION

Connections

Two conductor (four conductor for V-1060B only) twisted wire is required for the 45 Ohm talkback speakers. Standard 22 or 24 gauge station wire is acceptable. Shielded wire is not required or recommended.

Connections are as follows:

Speaker out from page control to speaker tip Speaker common to speaker ring

For 1060B only:

Switched -24VDC to -24VDC (LED) Power Supply ground to GND (LED)

Mounting

CEILING SPEAKERS: Cut an 8.5" diameter hole in ceiling tile. After connections have been made to the speaker, attach speaker to ceiling tile using the mounting hardware provided. NOTE: Where extra speaker support is needed,

aV-9916 or V-9916M Valcom Bridge and Backbox should be used.

WALL SPEAKERS: After making the required connections, fasten a suitable mounting screw (#10 sheet metal screw or similar) to the wall at the desired location for mounting of the speaker. Hang the speaker on the screw using the keyhole on the speaker bracket.

CORNER SPEAKERS: After making the required connections to the speaker, use appropriate hardware such as an 8d finishing nail and hang the speaker in the corner. Typical mounting height would be 8 feet.

CORRIDOR SPEAKERS: Unscrew mounting bracket and baffle from speaker assembly. Using appropriate hardware, mount the bracket to the wall. After making the required connections, reattach the baffle to the speaker and the speaker to the mounting bracket.

TECHNICAL ASSISTANCE

When trouble is reported, verify there are no broken connections. Troubleshooting assistance is available from the factory.

Call (540) 563-2000 and press 1 for Technical Support, or visit our website at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating company name, address, phone number, contact person and the nature of the problem. Send the unit to:

Valcom, Inc.

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA 24019-5056

 

 

TROUBLESHOOTING CHART

 

 

 

 

SYMPTOMS

ACTIONS

 

No sound in page mode

Check tip and ring for audio at speaker.

 

 

Check tip and ring for audio at control unit.

 

Low sound in page mode

Check volume controls at page control.

 

Poor listening in talkback mode

Check talkback volume control at page control. Set control where audio is

 

 

clearly audible.

 

No LED indication (on V-1060B)

Check presence and polarity of LED input signal.

 

 

 

 

 

 

VALCOM LIMITED WARRANTY

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:

1.inspection by Valcom, Inc. indicates the validity of the claim;

2.the defect is not the result of damage, misuse or negligence after the original shipment;

3.the product has not been altered in any way or repaired by others and that factory sealed units are unopened (A service charge plus parts and labor will be applied to units defaced or physically damaged);

4.freight charges for the return of products to Valcom are prepaid;

5.all units ‘out of warranty’ are subject to a service charge. The service charge will cover minor repairs (Major repairs will be subject to additional charges for parts and labor).

This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or use of the product.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Headquarters:

Valcom, Inc.

5614 Hollins Road

Roanoke, VA 24019-5056

Phone: (540) 563-2000

FAX: (540) 362-9800

3

Page 3
Image 3
Valcom V-1066A, V-1067A, V-1062A, V-1065A, V-1063A, V-1064A, V-1061-W Installation, Technical Assistance, Connections, Mounting

V-1065A, V-1062A, V-1061-BK, V-1067A, V-1066A specifications

Valcom offers a series of powerful intercom and paging solutions designed for commercial applications. The V-1064A, V-1060A, V-1063A, V-1061-W, and V-1066A models showcase innovative features suitable for a range of communication needs.

The Valcom V-1064A is a ceiling-mounted speaker that integrates seamlessly into any environment. It features an 8-inch speaker, offering a broad frequency range for clear audio output. With a built-in amplifier that ensures adequate sound projection, the V-1064A is ideal for areas like classrooms and offices where clear communication is crucial. It supports both standard and emergency alerts, making it a versatile choice for safety protocols.

Next, the V-1060A model stands out for its surface-mount design, allowing for easy installation in locations where ceiling access may be limited. This model includes a 4-inch speaker and is particularly suited for smaller spaces that require efficient sound distribution without compromising audio quality. It employs advanced technology to minimize distortion and ensure crisp voice transmissions, making it an excellent choice for intercom functionalities.

The V-1063A is a wall-mounted speaker that combines aesthetics with functionality. Featuring a 4-inch speaker, it provides clear audio and is perfect for environments that demand clear announcements. This model is designed for flexibility, making it suitable for both commercial and industrial applications. The V-1063A is also equipped with a built-in transformer, allowing it to operate on various power levels, ensuring adaptability.

The V-1061-W model is noteworthy for its wireless capabilities, facilitating easier installations without the need for extensive wiring. This model retains the same high-quality audio production characteristic of Valcom products, making it ideal for locations where cabling could be an issue. It is particularly useful in areas such as large warehouses or retail spaces where mobility and coverage are paramount.

Finally, the V-1066A takes intercom technology up a notch with its enhanced sound quality and integrated features. This speaker is designed for high-traffic areas and provides robust performance. Its weather-resistant design allows it to be used both indoors and outdoors, making it suitable for factories, outdoor venues, and other challenging environments.

In summary, Valcom's V-1060A series offers a diverse range of intercom solutions that combine innovative technology, quality audio performance, and practical design. Whether you're looking for ceiling-mounted, wall-mounted, or wireless options, these models provide versatile solutions for effective communication across various settings. Each model is designed with user needs in mind, ensuring reliable and clear audio delivery in both everyday and emergency situations.