Valcom dimensions V-2976 RED EMERGENCY CALL SWITCH, Introduction, Technical Assistance, Issue

Issue 1

V-2976

RED EMERGENCY CALL SWITCH

INTRODUCTION

The V-2976 Red Emergency Call Switch is designed to be used with Talkback Page Control Units with the remote calling feature. The V-2976 provides a vandal resistant momentary spring return switch for connection to customer provided signaling equipment.

DIMENSIONS/WEIGHT

4.50" H x 2.75" W x 1.50" D (11.43cm H x 6.99cm W x 3.81cm D) 0.2 lbs. (0.09 kg)

FEATURES

Designed to fit in a standard single-gang electrical box.

No external power source required. Stainless steel vandal resistant call button.

18gauge steel plate finished in high-gloss red enamel.

“EMERGENCY ONLY” screened in white lettering below the call button.

CONNECTIONS/SETUP

1.Connect switch leads from paging control unit to the two screw terminals on the rear of the V-2976, as shown in the connection diagram.

2.Place V-2976 over standard single-gang electrical box with minimum depth of

2 inches and fasten in place using the two #6-32 screws provided.

TECHNICAL ASSISTANCE

When trouble is reported, verify that there are no shorts or grounds on cabling.

Assistance in troubleshooting is available from the factory. When calling, you should have a VOM, a telephone test set available and call from the job site. Call (540) 563-2000 and press 1 for Technical Support or visit our website at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating company name, address, phone number, contact person and the nature of the problem. Send the unit to:

Valcom, Inc.

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA 24019-5056

1 947744