Valcom One-Way Amplified Interior Speakers, V-1016-W, V-1016-BK, V-1022C, V-1023C, V-1024C, V-1025C, V-1026C, V-1026C-W, V-1027C, are self-amplified and capable of reproducing paging as well as background music. These speakers have externally accessible volume controls that are screwdriver adjustable. The enclosures are vinyl laminated pressboard with either a coordinating cloth or woven can grille. All speakers require -24 Vdc, 50 mA (1 power unit) and are FCC Part 68 registered under BAFUSA-69358-KX-N.
INSTALLATION
Page | | | (Tip/A) | |
| | (Ring/B) | One-Way |
Out | | |
| | | |
| | (-24Vdc) | Amplified |
| | |
| | | (Gnd) | Speaker |
| | | |
Valcom Page | | | | | |
Control | | | | | |
| | | | Valcom -24 Vdc |
| | | |
| | | |
| | | | Power Supply |
| | | | |
Typical Connections | | | |
NOTE: Do not connect this speaker directly to a 25/70/100 volt amplifier as damage to both the amplifier and speaker may occur. A V-1095 may be used to allow the use of Valcom self-amplified speakers on 70V speaker lines.
Mounting
Ideal mounting heights are 8 to 12 ft. above the floor.
V-1016-BK,V-1016-W,V-1022C,V-1023C: Remove the screw holding the mounting bracket to the speaker housing. Mount bracket using appropriate hardware such as #8 pan head screws. After making the required connections, reattach the speaker housing to the mounting bracket.
•V-1016– 9.7”H x 11.5”W x 4.0”D (24.6cm H x 29.2cm W x 10.16cm D)
•4.1 lbs. (1.86kg)
•V-1022C– 9.6”H x 11.5”W x 4.2”D (24.4cm H x 29.2cm W x 10.7cm D)
•4.5 lbs. (2.04kg)
•V-1023C– 9.6”H x 11.5”W x 4.2”D (24.4cm H x 29.2cm W x 10.7cm D)
•4.1 lbs. (1.86kg)
V-1024C,V-1025C: After making required connec- tions, use appropriate hardware such as an 8d finishing nail to hang the speaker housing in the corner.
•10.5”H x 9.5”W x 6.3”D
(26.7cm H x 24.1cm W x 16cm D)
•3.6 lbs. (1.63kg)
