System Requirement
●Desktop or notebook computer with USB port
●One of the following operating systems (no driver needed): Windows® 98SE
Windows® ME Windows® 2000 Windows® XP Mac X
Installation
The USB Active Repeater Cable is fully compatible with plug and play specification under windows 98/SE, Windows ME/2000/XP and MAC systems. There is no driver installation needed when operates under these systems, simply connect it with your PC (or USB Hub) and device (or 2nd active repeater cable) and it’s ready to go.
Installation Verification
1.Go to System Properties in the Control Panel of your system.
2.Go to Device Manager of System Properties to find a device named Generic USB Hub in the Universal Serial Bus Controllers directory to verify the installation completed.
3.Find a USB device such as USB mouse, USB printer, etc in Device Manager to verify that your device is plugged well to the USB 2.0 active repeater cable and ready to go.
