Planetary Head Removal
1.Remove the top lid (1), attachment hub (7), the drive belt (2) and the front control panel (4).
2.The plastic ring (13) can be removed with a screwdriver by pressing it between the plastic ring and the frame, and then prying it down.
.
3.Remove the rubber ring (10) and the stainless steel cover (12) by prying it off with a screwdriver.
4.If only the lower part of the planetary head is to be repaired, the planetary head can be separated by removing the 3 bolts (11).
5.Loosen the set screw and remove the front pulley (3) . A 3 armed pulley puller may be required.
6.Take out the 4 screws (5).
7.By loosening and removing the 4 bolts (8), the planetary can be lowered and removed.
24
