Installation to a wood stud wall
Drill two 5/32" (4 mm) dia. holes 2 1/2" (65 mm) deep. Attach wall 
arm (A) with #14 x 2.5"(6 mm x 65 mm) wood screws (F).
WARNING
•Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power.
•Never tighten in excess of 80 in • lb (9 N.M.).
•Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is highly recommended.
∅ 5/32" |
(4 mm) |
A | ∅ 5/32"(4 mm) |
|
| F |
|
| A |
|
3 of 6 | ISSUED: | |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer service call | |
