Velodyne Acoustics DLS-3500R, DLS-5000R, DLS-3750R Congratulations, Prior to Installation

Congratulations!

Congratulations on your purchase of a Velodyne Distortion Limiting SystemTM Remote (DLS-R) subwoofer. This system represents the state-of-the-art in low frequency reproduction. Read and follow the instructions below to insure safe and proper system operation.

Warning!

To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all warnings on the equipment itself. There are no user serviceable parts inside. Please refer all service questions to your authorized Velodyne dealer.

Prior to Installation

Please unpack the system carefully. Remove all staples used to seal the carton as they can scratch the cabinet. Please save the carton and all packaging materials for future use. Record the serial number in the space provided on the warranty card for future reference.

Product Features and Controls

∙DSP-controlled

∙4 selectable presets for customized listening mode

∙Night-mode setting

∙Mute control

∙Built-in 160 watt (RMS) power amplifier (DLS-3500R)

∙Built-in 175 watt (RMS) power amplifier (DLS-3750R)

∙Built-in 200 watt (RMS) power amplifier (DLS-4000R)

∙Built-in 600 watt (RMS) power amplifier (DLS-5000R)

∙Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer Direct setting

∙Speaker-level inputs and outputs

∙85 Hz high-pass crossover

∙Line-level inputs

∙Signal sensing auto turn on/off with bypass option

∙Variable volume control

∙Selectable phase control (0, 90, 180, or 270 degrees)

∙Dual staggered low-pass crossover; 12 dB/octave initial, 24 dB/octave ultimate

continued. . .

2☞