Manuals / Brands / Home Audio / Speaker / Velodyne Acoustics / Home Audio / Speaker

Velodyne Acoustics SC-1250, SC-8, SC-10, SC-12, SC-15, SC-IW, SC-IF, SC-IC, SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC, SC-8 Subwoofers - page 13

1 26

Download 26 pages, 3.26 Mb

.www.velodyne.com SubContractor User’s Manual

(11) Balanced XLR LFE Input (See Figure 4)

This XLR input jack receives the balanced LFE signal from your receiver or processor.

Figure 4: Balanced Line-Level Connection.

(12) Mic Input

Connect the supplied microphone for the Auto-EQ featureto this mini-jack.

(13) IR Input

Connect an IR repeater to this jack for use with universal remote systems.

(14) 12V Trigger

When this mini jack is connected, the unit remains in power-off mode until 12 volts is

supplied across the two leads. Polarity is irrelevant.

(15) RS-232 In

Use this port to communicate with a touch panel remote control. See Appendix A for an

explanation of the use of the serial port, available commands, and their formats.

Contents

Main Page Page Page Page Table of Contents Congratulations Prior to Installation Product Features SC-1250 Subwoofer Amplifier SC-8, SC-10, SC-12, SC-15, SC-IW, SC-IF/IC Subwoofers FRONT PANEL CONTROLS AND DISPLAYS Installation REAR PANEL CONNECTIONS Page Page Page Page REAR PANEL CONNECTIONS DETAILED EXPLANATION About Low-Pass Crossovers Disabling the Low-Pass Crossover (Subwoofer Direct) -- A Word About Your Receivers Crossover and the SC-1250 Crossover A WordAbout Interconnect Cables AWord About Subwoofer Placement Selecting the Subwoofer(s) to be Controlled W SC-In Floor (SC-IF) IF SC-In Ceiling (SC-IC) IC Generic Subwoofer Remote Control Usage Page Restoring Defaults Care of your Amplifier and Subwoofer TROUBLESHOOTING AND SERVICE Thank You for Purchasing an SC-1250! Page Appendix A: RS-232 Serial Overview and Commands Introduction Com Port Setup SC IN and OUT Port Pin Configuration Page Other Velodyne Subwoofer Products: 110V 230V Velodyne Acoustics, Inc.