Prepare for Installation

Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best suited for your system. Remember to perform all installation procedures with system power turned

off to prevent possible damage.

P L A C E M E N T

True subwoofers operate at extremely low frequencies which are primarily omni-directional. While it is recommended that the subwoofer be placed on the same plane as the satellite speakers, room and system conditions often dictate otherwise. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. Typically, the optimum location for a subwoofer is tucked away in a corner of your listening room. This location will usually offer the greatest output levels and optimum low frequency extension. The worst location for a subwoofer is typically far away from any walls and close to the center of your room. Avoid these locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to place each subwoofer by the satellite of the same channel.

Caution! This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched or compressed in any way that could result in damaging the insulation or wire.

Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping or storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.

Your new Velodyne subwoofer, like any good speaker system, requires proper positioning within the listening space to provide maximum performance. Improperly placed speakers may degrade the sound quality and reduce your listening pleasure. Depending on the size and type of furnishings in the room, perfect placement may not be possible. Finding the best location within your environment will likely require some experimentation. We suggest you experiment with the location during setup to find what sounds best to you when seated in your typical listening position.

.w w w . v e l o d y n e . c o m

SPLi Series User’s Manual

2

Page 4 Page 6
Page 5
Image 5
Velodyne Acoustics SPL-1000I user manual Prepare for Installation, A C E M E N T
Page 4 Page 6

SPL-1000I specifications

Velodyne Acoustics has long been a leader in the audio industry, known for its innovative subwoofer technology. The SPL-1000I is one of its flagship products that exemplifies the brand's commitment to delivering high-performance sound. This subwoofer features an impressive 10-inch driver that is designed to produce deep, accurate bass, which is essential for both music enthusiasts and home theater aficionados alike.

One of the standout features of the SPL-1000I is its patented closed-loop servo technology. This technology employs a feedback system that continuously monitors the subwoofer's output and adjusts it in real-time. The result is remarkable accuracy, ensuring that the bass response remains consistent and distortion-free, even at high volumes. This capability enhances the overall audio experience, allowing listeners to feel the full impact of their favorite music and movie soundtracks.

Another critical characteristic of the SPL-1000I is its built-in amplifier, which delivers a powerful 1000 watts of peak power. This robust amplification allows the subwoofer to handle a wide range of frequencies while maintaining clarity and impact. The amplifier is designed to efficiently manage power, preventing overheating and ensuring long-term reliability.

Velodyne has also equipped the SPL-1000I with a variety of connectivity options to facilitate seamless integration into any audio system. It includes both line-level and speaker-level inputs, allowing it to connect easily with different types of receivers and amplifiers. Additionally, the subwoofer features adjustable phase control and crossover settings, enabling users to fine-tune the bass response to match their specific room acoustics and personal sound preferences.

The SPL-1000I is also built to last, featuring a sturdy cabinet design that minimizes resonance and cabinet vibrations. Its aesthetically pleasing finish allows it to blend seamlessly with various home decor styles, making it not just a functional piece of equipment but also an attractive addition to any space.

In summary, Velodyne Acoustics SPL-1000I is a powerful subwoofer that combines innovative technologies and user-friendly features. With its advanced servo technology, powerful amplification, and versatile connectivity options, it delivers an exceptional audio experience that satisfies both audiophiles and casual listeners alike. Whether watching a movie or listening to music, the SPL-1000I ensures that users will enjoy rich, deep bass that truly enhances their audio journey.
Top Page Image Contents