Velodyne Acoustics WiConnect user manual Active

A.CHANNEL: Select broadcast frequency. This CHANNEL selection must match CHANNEL selection on the transmitter.

B.LFE INPUT: Optional wired connection to receiver, if not using the wireless connection.

C.PHASE: Invert the phase of the subwoofer, if it blends better with the satellite speakers.

D.LOW-PASS CROSSOVER: Select the upper frequency to cut-off the audio signal to the subwoofer output.

E.ACTIVE:

•Solid yellow when ON/ACTIVE using wireless connection.

•Flashing yellow and green when ON/ACTIVE , but no RF signal.

•Solid Red when in ON/STAND BY.

•Subwoofer goes to STAND BY if no audio signal is present for 12 minutes.

F.VOLUME: Adjust subwoofer volume.

G.POWER: Switch power ON and OFF.

4 - WiConnect User’s Manual www.velodyne.com