6.4 WALL CONTROLS CONFIGURATION
See the configuration table below for the list of configuration parameters.
Press the Menu button for 3 seconds to enter or exit the configuration menu.
NOTE: The wall control automatically saves any changes and exits the configuration menu if no button is pressed within the
next 60 seconds.
Press the Menu button briefly to advance to the next parameter (menu number).
Press the or button to change the parameter setting.
CONFIGURATIONTABLE
6. CONTROLS (CONT’D)
MENU PARAMETER OPTIONS DEFAULT DESCRIPTION
NUMBER SETTING
1TEMPERATUREFORMAT °C / °F °C SELECTS BETWEEN °C AND °F DISPLAY.
2A
UTOMODE OPERATION RE / OF RE SELECTSBETWEEN AIR RECIRCULATION (RE) AND OFF (OF)
(SEE SECTION 6.3).
3AUTOMODE LOW -30°C TO 0°C -25°C PREVENTSAIR EXCHANGE IN AUTO MODE IF THE OUTDOOR
TEMPERATURELIMIT (-22°F TO 32°F) (-13°F)TEMPERATUREIS TOO LOW (SEE SECTION 6.3).
4AUTOMODE HIGH 0°C TO 30°C 27°C PREVENTS AIR EXCHANGE IN AUTO MODE IF THE OUTDOOR
TEMPERATURELIMIT (32°F TO 86°F) (81°F)TEMPERATURE IS TOO HIGH (SEE SECTION 6.3).
AU: THE SCREEN ILLUMINATES FOR 12 SECONDS WHEN ANY
5BACKLIGHT MODE AU / ON AU KEY IS PRESSED
ON: THE SCREEN IS PERMANENTLYILLUMINATED.
- 19 -