Antenna, Auto Scan, Channel Skip, Channel No

TV SETUP

TV MENU (For TV Mode Only)

1.Press the MENU button.

2.Use the or button to select TV, then press the button to enter the TV settings.

3.Use the or button to select the options (Antenna,

Auto Scan, Auto Scan Add CH, Channel Skip, Channel No. Channel Label or DTV Signal). Adjust them using the or button, or press the button to go into the detailed settings.

4.Press the MENU button to return to the previous menu.

5.Repeat steps 3 and 4 to adjust other options.

6.To exit the MAIN MENU and return to the normal screen, press the EXIT or MENU button repeatedly.

PICTURE AUDIO	TIME SETUP PARENTAL TV

Antenna			Air
Auto Scan
Auto Scan Add CH
Channel Skip
Channel No.	5-5
Channel Label			XXX
DTV Signal				Good
DTV Signal				Good
UP/DOWN		ADJUST "MENU":EXIT

Antenna	: Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite broadcasts, CH 1-135)
Auto Scan	mode are available.
Auto Scan	: Search for usable stations and store them in memory.

Auto Scan Add CH : Search for more usable stations and add them in memory. The stations stored before

Channel Skip	are still kept.
Channel Skip	: Skip weak channels and the channels you don’t like.
Channel No.	: Select a different TV channel.
Channel Label	: Display and edit the channel label.
DTV Signal	: Display the signal strength (for digital TV channels only).

Channel Skip

1.Use the or button to select a channel. (Press the button to select the last channel of the page; press again to go to the next page. Press the button to select the first channel of the page; press again to return to the previous page.)

2.Press the ENTER button to shift between On / Off. (Select On to skip the selected channel. The channel will not appear when you press the CH / CH button.)