E - 9
INSTALLATION

INSTALLING / REMOVING ThE BASE STAND

WARNING:TheLCDDisplay isveryfragile, andmustbe protectedatall timeswhenremoving the
basestand.Besurethatno hardorsharpobject,oranything thatcouldscratchordamage theLCD
display,comesintocontactwithit.DoNOTexertpressureonthefrontofthe��unitatanytimebecause
thescreencouldcrack.
1.Disconnectallcablesorcordsconnectedtotheunit.
2.Lay the unit down on a at surface with the back side
facingup.Please make sure to place a soft cushioned
material(suchasapilloworthickpieceoffoam)beneath
thescreen.
3.Toinstall the base stand, place the base stand on the
mountingslot,pushthestandtillitlocks.
4.Toremovethebasestand,keeppressingthelockingarea
ofthebasestandandpulldownwardstoreleasethebase
stand.

MOUNTING ThE TV UNIT

1) Markthecorrectmountingpositiononthewall.
2) Insertaxingscrew(s)atthemarkedpositiononthewall.
3) Align the slot hole(s) of the speaker over the screw and pull theTV downward until it is rmly
hooked.
NOTE
Removethebasestandbeforemountingtheunitonthewall.

Press and pull downwards

PLV76156S7_IB_UL_090727.indd 9 7/28/2009 09:41:10