Bulb Removal and Replacement
Step 1: Opening the Lens Cover
Place the HappyLight on its back on a large fat surface. Press down gently on the center of the lens cover (Fig. 1). This releases the locking tabs located under the grey handles. Open the lens cover by grasping the gray handles with your hands. Remove the lens and gently place it next to the unit with the logo face up.
Figure 1
Clips
Step 2: Opening the Bulb Clips
Locate the clear plastic clips across each fuorescent tube (Fig. 2). Put a finger under the clear plastic clip on the outer side and pull up (Fig. 3). The clip should pop open. Repeat on other side.
Figure 2
Figure 3
8
