Assembly Instructions
Adjustment Knobs
Upper Shaft (A)
Upper Shaft
Tightening Nut
Middle Shaft (B)
Lower Shaft (C)
Cord
Connectors
Base
Lamp Head
Read Instructions Carefully Before Assembly:
1.Set all parts of lamp on a carpet.
2.Insert Middle Shaft (B) into the Tightening Nut attached to the Upper Shaft (A). Rotate in clockwise manner to fasten securely.
3.Plug cord connectors together at base of lamp (Fig.1).
4.Secure lower shaft (C) to base and tighten by rotating clockwise.
5.With lower shaft (C) and base standing upward, fold extra cord and insert into the lower shaft (C), and screw together upper portion of the lamp and lower portion until the shafts are secure.
Fig. 1
Floor Switch
4