MENU MODE
RX DSP GROUP
102 rdSP SSB SHP
Function: Selects the passband characteristics of the DSP filter for the SSB modes (LSB and USB).
Available Values: SOFt/ShAP
Default Setting: ShAP
SOFt (SOFT): Primary importance is attached to the amplitude of the filter factor.
ShAP (SHARP):Primary importance is attached to the phase of the filter factor.
103 rdSP SSB SLP
Function: Selects the shape factor of the DSP filter for the SSB modes (LSB and USB).
Available Values: StP(STEEP)/nEd(MEDIUM)/ GEnt(GENTLE)
Default Setting: nEd (MEDIUM)
104 rdSP SSB NAR
Function: Selects the passband of the DSP filter for the “Narrow” SSB mode.
Available Values: 200/400/600/850/1100/1350/1500/ 1650/1800/1950/2100/2250 Hz
Default Setting: 1800 Hz
STEEP
MEDIUM
GENTLE
DSP FILTER PASSBAND
SHARPSOFT
DSP FILTER SHAPE
SCOPE GROUP
ADVICE:
This group’s adjustment has no effect, if the optional DMU- 2000 Data Management Unit is not connected.
105 SCP 1.8 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 160 m amateur band.
Available Values: 1.800 - 1.999 MHz (1 kHz/step)
Default Setting: 1.800 MHz
106 SCP 3.5 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 80 m amateur band.
Available Values: 3.500 - 3.999 MHz (1 kHz/step)
Default Setting: 3.500 MHz
107 SCP 5.0 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 60 m amateur band.
Available Values: 5.250 - 5.499 MHz (1 kHz/step)
Default Setting: 5.250 MHz
108 SCP 7.0 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 40 m amateur band.
Available Values: 7.000 - 7.299 MHz (1 kHz/step)
Default Setting: 7.000 MHz
109 SCP 10.1 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 30 m amateur band.
Available Values: (1)0.100 - (1)0.149 MHz (1 kHz steps)
Default Setting: (1)0.100 MHz
Page 122 |