Vertex Standard FT-2000 manual 96

MEMORY OPERATION

CONVENIENT MEMORY FUNCTIONS

The FT-2000contains ninety-nine regular memories, labeled “01” through “99,” nine special programmed limit memory pairs, labeled “P-1L/1U” through “P-9L/9U,” and five QMB (Quick Memory Bank) memories, labeled “C-1” through “C- 5.” Each stores various settings, not only the Main band’s (VFO-A) frequency and mode (See below). By default, the 99 regular memories are contained in one group; however, they can be arranged in up to six separate groups, if desired.

QUICK POINT:

The FT-2000’s memory channels store the following data (not just the operating frequency):

￿Frequency

￿Mode

￿Clarifier status and its Offset Frequency

￿ANT status

￿ATT status

￿IPO status

￿VRF status

￿Roofing filter status and its Bandwidth

￿Noise Blanker status

￿CONTOUR status and its Peak Frequency

￿DSP Noise Reduction (DNR) status and its Reduction algorithm selection.

￿DSP Notch filter (NOTCH) status

￿NAR bandwidth status

￿DSP Auto Notch filter (DNF) status

￿Repeater Shift Direction and Shift Frequency

￿CTCSS status and Tone Frequency

REGULAR MEMORY CHANNELS

PMS MEMORY CHANNELS

99

P-9L/9U

98

P-8L/8U

97

P-

7L/7U

P-

6L/6U

P-

5L/5U

P-

4L/4U

03

P-

3L/3U

02

P-

2L/2U

01

P-

1L/1U

QMB MEMORY CHANNEL

Page 94 FT-2000 OPERATING MANUAL