Vertex Standard HX270E 5.15.1 bEP (KEY BEEP), 5.15.2 dUL (DW DISPLAY), 5.15.3 LP (LAMP MODE), 5.15.4 SnL (SCAN LAMP), 5.15.5 SCn (SCAN DISPLAY)

HX270E Page 21
Key Continuous Off
Normal Special
5.15.1 bEP (KEY BEEP)
Function: Enable/Disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
5.15.2 dUL (DW DISPLAY)
Function: Selects the Dual Watch scanning display mode.
Available Values: nor (Normal)/SPL (Special)
Default: SPL (Special)
When “Special” is selected, channel number which is the LCD shows re-
ceived channel.
5.15.3 LP (LAMP MODE)
Function: Select the LCD/Keypad Lamp mode.
Available Values: kEy (KEY)/Cnt (Continue)/oFf
Default: kEy (KEY)
kEy: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
Cnt: Illuminates the LCD/Keypad continuously.
oFf: Disables the LCD/Keypad illumination.
5.15.4 SnL (SCAN LAMP)
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.15.5 SCn (SCAN DISPLAY)
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor: The channel number changes when scanning.
SPL: The channel number only changes when the radio receives a trans-
mission. This lets you see the last channel on which someone called.