Vertex Standard VX-2100, VX-2200 Installation of Option

Installation of Option

G-1

The FVP-25 is an Encryption/DTMF Pageing Unit which

permits secure voice communications with station within

your network, while preventing others from listening us-

ing normal communications equipment. It allows paging,

and enables selective calling using DTMF tone sequences.

The FVP-35 is an Rolling Code Encryption Unit which

permits secure voice communications with station with-

in your network, while preventing others from listening

using normal communications equipment.

The FVP-36 is an Voice Inversion Type Encryption Unit

which permits secure voice communications with station

within your network, while preventing others from lis-

tening using normal communications equipment.

Each optional Unit is easily programmed the configula-

tions using a Vertex CE82 programmer with an IBM PC-

compatible computer.

1. Disconnect the DC power cable.

2. Referring to Figure 1, remove the 8 screws affixing the

Top Cover, then remove the top cover.

3. Referring to Figure 2 & Figure 3, locate the empty con-

nector for the Optional Unit, connect the Optional Unit

here.

4. Replace the Top Cover and 8 screws . Installation is

now complete.

Do not install all Optional Unit at onece

Figure 1 Figure 2 Figure 3

°

FVP-25/FVP-35/FVP-36

Contents

Main VHF FM Transceiver VX-2100 Series VX-2200 Series Service Manual Introduction Specifications (VTX/EXP Version) General A-1 Receiver Transmitter Specifications (EU Version) A-2 General Receiver Transmitter DSUB 15-pin Accessory Connector B-1 Pin 1: AF IN (ANALOG INPUT) Pin 6: EXT PTT Pin 7: TRX Exploded View & Miscellaneous Parts VX-2100 FRONT PANEL VX-2200 FRONT PANEL Page Page Page 1. Circuit Configuration by Frequency 2. Receiver System E-1 Circuit Description 3. Transmitter System Circuit Description E-2 Introduction Required Test Equipment F-1 Alignment Preparation & Precautions Test Setup The Alignment Tool Outline Basic Alignment Mode F-2 F-3 1. RX VCO Tune Voltage (RX VCO) 2. TX VCO Tune Voltage (TX VCO) Unit 4. RX Sensitivity (RX Tune) 5. Squelch (SQL) F-4 3. PLL Reference Frequency (Frequency) 6. TX Power F-5 9. Sequential Tone Deviation 8. Sub Audio Deviation <CTCSS> / <DCS> F-6 7. Maximum Deviation <Wide> / <Narrow> CH (Channel-by-Channel) Fine Alignment Mode F-7 Installation of Option FVP-25/FVP-35/FVP-36 G-1 H-1 Circuit Diagram Page H-3 Page Page Page H-7 MAIN Unit (Lot. 5~8) Page Page H-11 MAIN Unit (Lot. 9~17) H-12 MAIN Unit (Lot. 9~17) Page Page H-15 MAIN Unit (Lot. 18~20) H-16 MAIN Unit (Lot. 18~20) Page Page H-19 MAIN Unit (Lot. 21~) H-20 MAIN Unit (Lot. 21~) H-21 H-22 H-23 H-24 H-25 H-26 H-27 H-28 H-29 H-30 H-31 H-32 H-33 H-34 Parts ListParts List H-35 Page Page FRONT-A Unit (VX-2100) I-3 FRONT-A Unit (VX-2100) Page J-1 Circuit Diagram Page J-3 Page FVP-25 Encryption/DTMF Pager Unit (Option) K-2 FVP-25 Encryption/DTMF Pager Unit (Option) Page L-2 FVP-36 Voice Inversion Type Encryption Unit (Option)