Vertex Standard VXA-710

VXA-710 SPIRIT OPERATING MANUAL

MENU (“SET”) MODE

5. Dimmer

Function: Setting of the display brightness level.

Available Values: LV 1 - LV 4

Default Setting: LV 3

6. Meter Symbol

Function: Selects the S- & TX PO meter symbol.

Available Values: Four patterns

Default Setting:

7. Display Mode

Function: Selects the display of the sensor units’ informa-

tion.

Available Values: Off/Temp/Volt

Default Setting: Off

Off: Disables the sensor information.

Temp:Indicates the current temperature inside the

transceiver’s case.

Volt: Indicates the battery voltage and battery type.

1. DISPLAY

1. Scan Lamp

Function: Enables/Disables the Scan lamp while paused

during scanning.

Available Values: On/Off

Default Setting: On

2. Backlight

Function: Selects the Display illumination Mode.

Available Values: Key/Off/On

Default Setting: Key

Key: Illuminates the Display Lamp for 5 seconds when

any front panel key is pressed.

Off: Disables the Display lamp.

On: Illuminates the Display lamp continuously.

3. Large Font

Function: Selects the frequency display between the

“Large Character” and “Small Character” modes.

Available Values: Off/On

Default Setting: On

4. Contrast

Function: Setting of the display contrast.

Available Values: 00 - 15

Default Setting: 06