Vestax PCV-002 owner manual HOW to Remove the TOP Panel, HOW to Change the Fader Unit

How to change the fader unit.

■HOW TO REMOVE THE TOP PANEL driver

○1 Remove all fader knobs and the 4screws which

fix the top panel.(see fig.A) ○2 Remove the top panel.

■HOW TO CHANGE THE FADER UNIT

○1 Remove the screws on the fader panel.(see fig.B) ○2 Remove the fader unit from position in mixer.

○3 Carefully remove the multi-cable connector from fader unit.(see fig.C)

○4 Attach multi-cable connector to new fader unit.

○5 Position the fader unit carefully and secure with screws.

Remove the multi-cable マルチケーブル�

コconnectorネクターをfrom抜く�fader unit.

角4点のネジを外す。� fig.C Remove four scews.

You can replace the CFunit with "CF-RUS", "CF-R" or "CF-PCV".

■HOW TO REPLACE THE CF UNIT WITH "CF-PCV"

When the fader unit is replaced, please see fig.C.

Place the fader unit in the proper position and fix it

with two screws.(fig.D-○b)

CAUTION

fig.A

driver

fig.B

There is a swith for "CF-PCV" unit. When "CF- PCV" unit is installed, set the switch to "PCV" mode.

CAUTION

When the fader unit is replaced, do not loosen the screws with marking.

fig.D

6

CF-RUS or CF-R CF-PCV