8
Connecting Phono terminal
With the RCA cable (accessory 7) and the GND cable (accessory
8), connect the output terminals and the GND terminal on the
PDX-2300 rear panel, and the phono input terminals to the
respective terminals on your amplifier/mixer.
PDX-2000MkII/MkII Pro
REAR PANEL
RCA JACKWHITE L
RCA JACK RED R
GNDTERMINAL
RCA CABLE WHITE/L
CABLE
Connection
CABLE
Connection
RCA CA BLE RED/ R
PHONO L Channel
PHONO R Channel
GNDTRMINAL
AMP/AUDIO MIXER
GND CABLE BLACK
PDX-2000MkII / MkII Pro
REMOTE
RL
OUTPUT
SERIAL NO.
REMOTE
RL
OUTPUT
SERIAL NO.
PDX-2000MkII / MkII Pro
Ensure that the GND (ground) terminal is firmly
connected to a mixer or amplifier. If the GND terminal
is not correctly connected HUM may persist.
Example
qInstall the cartridge, headshell and balance weight to the tone-
arm.
Adjustment of Horizontal Zero Balance
ADJUSTMENT(S)The balance weight and cartridge are
balanced, the tone-arm is held horizontal.
The balance weight setting is too heavy.
The balance weight setting is too light.
ePut the tone-arm on the arm rest and lock it.
wUnlock the arm rest, adjust the tone-arm balance by rotating
the balance weight, so that the tone-arm stays in horizontal
position in balance.
Please be sure that the needle does not touch the
platter or the other object in adjustment procedure.