Victor 1210-3A instruction manual Replacing the BACK-UP Battery

	Problem	Operation		Read- out
How to set date:		= (Hold for 3 seconds)			MM-DD-YYYY
Oct.29,2001					“M”M-DD-YYYY
		SET
		10			10-“D”D-YYYY
					10-29-“2”YYY
		29
					“1”0-29-2001
		2001
					10-29-2001
		SET
		=
How to set time:		SET		AM	HH-MM-SS
		C/CE
a)	3:45AM	= (Hold for 3 seconds)		AM	“H”H-MM
		0SET 3 4 5		AM	“0”3-45
b)	3:45PM	=		AM	03-45-00
		SET		AM	“0”3-45
		= (Hold for 3 seconds)
c)	15:45	AM/PM	SET	PM	03-45-00
		×	=
		12/24			15-45-00
		÷

DATE FORMAT: While displaying the date, depressing the %± key allows changingthe date format mode from MM-DD-YYYYto DD-MM-YYYYor YYYY-MM-DD. The default date format is MM-DD-YYYY.

REPLACING THE BACK-UP BATTERY:

1)Using a screwdriver remove the three screws on the back cover of the calculator.

2)To separate the front and back cover halves, carefully insert and twist a flat-blade screwdriver between them.

3)Use a flat-blade screwdriver to gently pry out the battery.

4)Position the new battery so the positive (+) side is up. Slide one edge of the battery under the tab on the battery holder, then press the battery into place.

5)Snap the cover halves back together. Then reinsert and tighten the screws.

NOTE: Memory backup battery retains the tax rate, calendar and clock setting,

when the power is off or even when the AC cord is disconnected.

Battery: 1 Lithium battery (Type: CR 2032)

Battery life: Backup time 1000 hours