VPI | VIDEO | 1275 Danner Drive Aurora,Ohio 44202 |
PRODUCTS | Tel: 330-562-7070 Fax: 330-562-1999 |
INCORPORATED | www.vpi.us |
| |
INSTALLATION GUIDE FOR THE
SE-SV-2-LC
INTRODUCTION
The SE-SV-2-LC S-Video Switch allows two S-Video sources to be switched between a single S-video display. The S-video may come from sources such as a PC, DVD player, satellite receiver, or VCR to name a few. With 150 MHz bandwidth, the SE-SV-2-LC supports standard S- video resolution–up to 800 x 600.
INSTALLATION
1.Turn OFF power to sources and display.
2.Connect the SVEXT-3-MM S-video cable (supplied) from the display to the female connector labeled "S-VIDEO OUT" on the SE-SV-2-LC.
3.Install one male end of another SVEXT-x-MM cable (not supplied) into a source’s S-video output connector.
4.Install the other male end of the same SVEXT-x-MM cable into the female connector labeled "S-VIDEO IN 1" on the SE-SV-2-LC.
5.An additional S-video source may be plugged into the remaining female connector labeled "S-VIDEO IN 2" as required.
6.Plug in the AC adapter and connect it to the SE-SV-2-LC.
7.Turn ON power to the sources and display.
Note: Additional S-video cable lengths (SVEXT-xx-MM where xx is the length of the cable in feet) may be ordered from Video Products Inc by calling (800) 626-7801 (U.S) or 330-562-7070 or visit our website at www.vpi.us.
PC, DVD, Satellite, or VCR
PC, DVD, Satellite, or VCR
S-Video Cable (not supplied)
S-Video Cable | S-VIDEO IN 1 | Video Products Inc | VIDEO- 5V OUT0.5A |
(not supplied) | S | | VPI | R | S |
| |
| | |
| -VIDEO IN2 | SE-SV-2-LC | SELECT |
| | |
| | | | | |
Top View of SE-SV-2-LC
AC Adapter (supplied)
SVEXT-3-MM (supplied)
Left End View of SE-SV-2-LC | Right End View of SE-SV-2-LC |
OPERATION
Press the select button to switch between connected S-video sources.
