8
Unpacking
Open the shipping carton and check the package contents.
If any items are missing or damaged, contact us immediately.
The package should include the following items:
- 15”/ 17”/ 19” TFT-LCD monitor
-Power cord
-AC/DC power adapter
-VGA cable
-Audio cable
-User's manual
Installing the Base
Follow these steps to install the base:
1. Turn the monitor down.
2. Assembly the base to the arm with screw.
3. Tighten the screw with a coin.
Installing the Monitor
This monitor is equipped with an auto sensing DC power adapter for voltage
ranges of 100-240VAC, 60/50Hz. Follow these steps to install the monitor:
1. Before you connect the cables, make sure that the monitor and th e system
unit power switches are off.
2. Plug one end of th e VGA cable or DVI cable to the monitor and the other
end to the video signal connector at the r ear of the system. Tighten the two
screws on the cable connector.
3. Connect the AC/DC power cord to the DC jack.
4. Connect the power cable.