1) No image
Check if the power cord、the monitor and the power plug are well connected.
Check if the monitor is off, please contact support@viewera.com for assistance.
2) “No Input Signal” appears.
Check if the VGA cable is tightly connected between the video output connector on the video
card and the video input connector on the monitor.
Check if your video card driver i s correctly installed. If possible, please re-install or update your
video card driver.
3) The image is blurry or not positioned correctly.
Enter the Image menu in the OSD and then select “Auto Adjust” to adjust the display to optimum.
Refer to Chapter 2.6, set your monitor to its native resolution of 1680 by 1050.
4) The color is abnormal
Check the connection of signal cable and make sure t he two screws on t he connector are
securely tightened.
Chick if there is any pin on the signal cable bent or broken off. If there is, it is required to replace
the signal cable.
Enter the Color Temperature menu and select AUTO Color to recall the factory settings for color
hue.
13