ViewSonic A71F+ manual Quick Installation

Quick Installation

1Connect the monitor and computer power cords to a properly grounded AC outlet.

2Connect the video cable from your monitor to your computer.

NOTE: Macintosh users may need an adapter. (See Customer Support on page 12.)

3Turn on your monitor, then your computer. This sequence (monitor before computer) is important.

NOTE: Windows 95, 98 or 2000 users may receive a message asking them to install the INF file. This is on the CD.

4Insert the ViewSonic Wizard CD.

NOTE: If you do not have a CD-ROM drive, contact ViewSonic Customer Support.

NOTE: If the CD does not auto- start, double-click the CD icon in Windows Explorer, then double- click vswzrd.exe.

Macintosh users: from the Macintosh desktop, double-click on the “ViewSonic Wizard” folder, then double-click on the “ViewSonic” icon.

5Follow the on-screen instructions.

Windows users: Set the timing mode (see Setting up the Timing Mode on page 5).

To register your product online, go to the ViewSonic website for your region. See the Customer Support table in this guide.

AC wall outlet

Power cables

VGA video cable

ViewSonic A71f+ 4